mirror of
https://github.com/Proxmark/proxmark3.git
synced 2024-12-03 18:50:27 -08:00
80 lines
3.4 KiB
Markdown
80 lines
3.4 KiB
Markdown
# proxmark3: the official Proxmark repository!
|
||
|
||
The proxmark3 is a powerful general purpose RFID tool, the size of a deck
|
||
of cards, designed to snoop, listen and emulate everything from
|
||
**Low Frequency (125kHz)** to **High Frequency (13.56MHz)** tags.
|
||
|
||
This repository contains enough software, logic (for the FPGA), and design
|
||
documentation for the hardware that you could, at least in theory,
|
||
do something useful with a proxmark3.
|
||
|
||
## Resources
|
||
|
||
* [This repository!](https://github.com/Proxmark/proxmark3)
|
||
* [The Wiki](https://github.com/Proxmark/proxmark3/wiki)
|
||
* [The GitHub Pages website](http://proxmark.github.io/proxmark3/)
|
||
* [The Forum](http://www.proxmark.org/forum)
|
||
* The IRC channel: irc.freenode.org #proxmark3 ([chat in your browser](http://webchat.freenode.net/?channels=#proxmark3))
|
||
* [The Homebrew formula repository](https://github.com/Proxmark/homebrew-proxmark3)
|
||
* [Proxmark3 community discord server](https://discord.gg/86VcRtS)
|
||
|
||
## Development
|
||
|
||
The tools required to build or run the project will vary depending on
|
||
your operating system. Please refer to [the wiki](https://github.com/Proxmark/proxmark3/wiki) for details.
|
||
|
||
## Obtaining hardware
|
||
|
||
The Proxmark3 is available for purchase (assembled and tested) from the
|
||
following locations:
|
||
|
||
| Distributor Name | Warehouse Location | Entity Location |
|
||
|------------------|--------------------|-----------------|
|
||
| [RyscCorp](https://proxmark3.com/) | USA | USA |
|
||
| [Hackerwarehouse](https://hackerwarehouse.com/) | USA | USA |
|
||
| [Elechouse](http://www.elechouse.com/) | HK | HK |
|
||
| [Lab401](https://lab401.com/) | EU | HK |
|
||
| [RFxSecure](http://www.rfxsecure.com/) | CN | SG |
|
||
| [Sneaktechnology](https://www.sneaktechnology.com/) | CN | CN |
|
||
|
||
|
||
Most of the ultra-low-volume contract assemblers could put
|
||
something like this together with a reasonable yield. A run of around
|
||
a dozen units is probably cost-effective. The BOM includes (possibly-
|
||
outdated) component pricing, and everything is available from Digikey
|
||
and the usual distributors.
|
||
|
||
If you've never assembled a modern circuit board by hand, then this is
|
||
not a good place to start. Some of the components (e.g. the crystals)
|
||
must not be assembled with a soldering iron, and require hot air.
|
||
|
||
The schematics are included; the component values given are not
|
||
necessarily correct for all situations, but it should be possible to do
|
||
nearly anything you would want with appropriate population options.
|
||
|
||
The printed circuit board artwork is also available, as Gerbers and an
|
||
Excellon drill file.
|
||
|
||
|
||
## License
|
||
|
||
This program is free software; you can redistribute it and/or modify
|
||
it under the terms of the GNU General Public License as published by
|
||
the Free Software Foundation; either version 2 of the License, or
|
||
(at your option) any later version.
|
||
|
||
This program is distributed in the hope that it will be useful,
|
||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
GNU General Public License for more details.
|
||
|
||
You should have received a copy of the GNU General Public License
|
||
along with this program; if not, write to the Free Software
|
||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||
|
||
|
||
Jonathan Westhues
|
||
user jwesthues, at host cq.cx
|
||
|
||
May 2007, Cambridge MA
|