This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
Ports
telnet_port 4444
gdb_port 3333
Interface
source [find interface/sysfsgpio-raspberrypi.cfg]
use combined on interfaces or targets that can’t set TRST/SRST separately
reset_config srst_only srst_pulls_trst
jtag newtap sam7x cpu -irlen 4 -ircapture 0x1 -irmask 0xf
#target create sam7x.cpu arm7tdmi -endian little -chain-position sam7x.cpu -variant arm7tdmi
target create sam7x.cpu arm7tdmi -endian little -chain-position sam7x.cpu
sam7x.cpu configure -event reset-init {
soft_reset_halt
mww 0xfffffd00 0xa5000004 # RSTC_CR: Reset peripherals
mww 0xfffffd44 0x00008000 # WDT_MR: disable watchdog
mww 0xfffffd08 0xa5000001 # RSTC_MR enable user reset
mww 0xfffffc20 0x00005001 # CKGR_MOR : enable the main oscillator
sleep 10
mww 0xfffffc2c 0x000b1c02 # CKGR_PLLR: 16MHz * 12/2 = 96MHz
sleep 10
mww 0xfffffc30 0x00000007 # PMC_MCKR : MCK = PLL / 2 = 48 MHz
sleep 10
mww 0xffffff60 0x00480100 # MC_FMR: flash mode (FWS=1,FMCN=72)
sleep 100
}
gdb_memory_map enable
#gdb_breakpoint_override hard
#armv4_5 core_state arm
sam7x.cpu configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x10000 -work-area-backup 0
flash bank sam7x512.flash.0 at91sam7 0 0 0 0 sam7x.cpu 0 0 0 0 0 0 0 18432
flash bank sam7x512.flash.1 at91sam7 0 0 0 0 sam7x.cpu 1 0 0 0 0 0 0 18432
Proxmark Wiki
Hardware
Firmware Upgrade
Client Software
Usage
Low Frequency (125-134kHz)
High Frequency (13.56MHz)
Struggling with this manual? Do you miss some explanation or found something wrong or ambigious? Then please post in the Manual Feedback section of the forum. Any feedback is appreciated.