style

client/src/cmdlf.c

@@ -793,7 +793,7 @@ int CmdLFRead(const char *Cmd) {
     bool cm = arg_get_lit(ctx, 3);
     CLIParserFree(ctx);
 
-    // the 40000 there should be the result of BigBuf_max_traceLen(), 
+    // the 40000 there should be the result of BigBuf_max_traceLen(),
     // but IDK how to get it.
     bool realtime = samples > 40000;
 
@@ -904,7 +904,7 @@ int CmdLFSniff(const char *Cmd) {
     bool cm = arg_get_lit(ctx, 3);
     CLIParserFree(ctx);
 
-    // the 40000 there should be the result of BigBuf_max_traceLen(), 
+    // the 40000 there should be the result of BigBuf_max_traceLen(),
     // but IDK how to get it.
     bool realtime = samples > 40000;
 

covsubmit.sh

@@ -5,6 +5,37 @@ set -e
 
 pre_submit_hook
 
+echo "Checking upload permissions..."
+
+if ! up_perm="$(wget https://scan.coverity.com/api/upload_permitted --post-data "token=${COVTOKEN}&project=${COVPROJECT}" -q -O -)"; then
+    echo "Coverity Scan API access denied: bad token?"
+    exit 1
+fi
+
+# Really up_perm is a JSON response with either
+# {upload_permitted:true} or {next_upload_permitted_at:<date>}
+# We do some hacky string parsing instead of properly parsing it.
+case "$up_perm" in
+    *upload_permitted*true*)
+        echo "Coverity Scan: upload permitted"
+        ;;
+    *next_upload_permitted_at*)
+        if [ -z "$COVERITY_DRYRUN" ]; then
+            echo "Coverity Scan: upload quota reached; stopping here"
+            # Exit success as this isn't a build error.
+            exit 0
+        else
+            echo "Coverity Scan: upload quota reached, continuing dry run"
+        fi
+        ;;
+    *)
+        echo "Coverity Scan upload check: unexpected result $up_perm"
+        exit 1
+        ;;
+esac
+
+
+
 ## delete all previous tarballs
 rm -f proxmark3.all.*.tgz proxmark3.all.*.log
 
@@ -25,7 +56,7 @@ curl --progress-bar --fail \
   --form file="@$FILENAME" \
   --form version="$VERSION" \
   --form description="$DESCNAME" \
-  https://scan.coverity.com/builds?project=Proxmark3+RRG+Iceman+repo | tee -a "${LOGFILENAME}" ; test "${PIPESTATUS[0]}" -eq 0  || exit $?
+  https://scan.coverity.com/builds?project="${COVPROJECT}" | tee -a "${LOGFILENAME}" ; test "${PIPESTATUS[0]}" -eq 0  || exit $?
 echo "tarball uploaded to Coverity for analyse"
 
 post_submit_hook

doc/commands.json

@@ -9992,21 +9992,19 @@
         },
         "lf read": {
             "command": "lf read",
-            "description": "Sniff low frequency signal. - use `lf config` to set parameters. - use `data plot` to look at it",
+            "description": "Sniff low frequency signal. - use `lf config` to set parameters. - use `data plot` to look at it. If the number of samples is more than the device memory limit (40000 now), it will try to use the real-time sampling mode.",
             "notes": [
                 "lf read -v -s 12000 -> collect 12000 samples",
-                "lf read -s 3000 -@ -> oscilloscope style",
-                "lf read -r -> use real-time mode"
+                "lf read -s 3000 -@ -> oscilloscope style"
             ],
             "offline": false,
             "options": [
                 "-h, --help This help",
                 "-s, --samples <dec> number of samples to collect",
                 "-v, --verbose verbose output",
-                "-@ continuous reading mode",
-                "-r, --realtime real-time reading mode"
+                "-@ continuous reading mode"
             ],
-            "usage": "lf read [-hv@r] [-s <dec>]"
+            "usage": "lf read [-hv@] [-s <dec>]"
         },
         "lf search": {
             "command": "lf search",
@@ -10179,21 +10177,19 @@
         },
         "lf sniff": {
             "command": "lf sniff",
-            "description": "Sniff low frequency signal. You need to configure the LF part on the Proxmark3 device manually. Usually a trigger and skip samples is a good thing to set before doing a low frequency sniff. - use `lf config` to set parameters. - use `data plot` to look at sniff signal. - use `lf search -1` to see if signal can be automatic decoded",
+            "description": "Sniff low frequency signal. You need to configure the LF part on the Proxmark3 device manually. Usually a trigger and skip samples is a good thing to set before doing a low frequency sniff. - use `lf config` to set parameters. - use `data plot` to look at sniff signal. - use `lf search -1` to see if signal can be automatic decoded. If the number of samples is more than the device memory limit (40000 now), it will try to use the real-time sampling mode.",
             "notes": [
                 "lf sniff -v",
-                "lf sniff -s 3000 -@ -> oscilloscope style",
-                "lf sniff -r -> use real-time mode"
+                "lf sniff -s 3000 -@ -> oscilloscope style"
             ],
             "offline": false,
             "options": [
                 "-h, --help This help",
                 "-s, --samples <dec> number of samples to collect",
                 "-v, --verbose verbose output",
-                "-@ continuous sniffing mode",
-                "-r, --realtime real-time sniffing mode"
+                "-@ continuous sniffing mode"
             ],
-            "usage": "lf sniff [-hv@r] [-s <dec>]"
+            "usage": "lf sniff [-hv@] [-s <dec>]"
         },
         "lf t55xx bruteforce": {
             "command": "lf t55xx bruteforce",
@@ -12070,6 +12066,6 @@
     "metadata": {
         "commands_extracted": 699,
         "extracted_by": "PM3Help2JSON v1.00",
-        "extracted_on": "2023-12-01T09:58:53"
+        "extracted_on": "2023-12-01T14:06:40"
     }
 }